#! /bin/sh

# This versions includes -modelsim option which runs a modelsim batch simulation
#   this picks up otherwise undetected problems with variables (logic/reg) being
#   used where wires should have been used

SYS=system
LIB=example
SIM_OPT=
LIB_OPT=
SIM_TIME=
MAX_LEDS=
DATA_FILE=
SVPROG=
TIMESCALE=

simcommand="ncverilog -sv +gui +ncaccess+r"
vsim_options=""
simtype=NC_GUI

while
  case $1 in
    -*) true ;;
    *) false ;;
  esac
do
  option="$1"
  shift
  if [ "${option}" = "-no_graphics" ] 
  then
    # ignore -no_graphics option for modelsim
    if [ "${simtype}" = "NC_GUI" ]
    then
      simcommand="ncverilog -sv"
      simtype=NC
    fi
  elif [ "${option}" = "-modelsim" ] 
  then
    simcommand="vlog -sv"
    vsim_options="-R -do vsim.cmd -c"
    simtype=MODELSIM
  elif [ "${option}" = "-q" ]
  then
    SIM_OPT="$SIM_OPT -q"
  elif [ "${option}" = "-gate" ] # switch level simulation of fcde cells
  then
    LIB_OPT="${LIB_OPT} -y /opt/cad/bim/fcdeCells/verilog/behavioural"
    TIMESCALE="+nctimescale+1ns/10ps"
  elif [ "${option}" = "-lib" ] 
  then
    if [ ! -f "$1" ]
    then
      echo "No verilog library file provided: $1"
      exit
    fi
    LIB_OPT="${LIB_OPT} -v $1"
    shift
  else
    echo "unknown option for simulate: ${option}"
    exit
  fi
done

if [ -d "$1" ]
then
   LIB=$1
   shift
fi

if [ -f "$1" ]
then
   PROG=$1
   if [ `basename ${PROG} .hex` != `basename ${PROG}` ]
   then
     echo Found hex program file ${PROG}
     HEXPROG="${PROG}"
   elif [ `basename ${PROG} .sv` != `basename ${PROG}` ]
   then
     echo Found verilog program file ${PROG}
     SVPROG="${PROG}"
     HEXPROG=`dirname ${PROG}`/`basename ${PROG} .sv`.hex
     echo $HEXPROG
   elif [ `basename ${PROG} .txt` != `basename ${PROG}` ]
   then
     echo Found assembler text program file ${PROG}
     
     HEXPROG=`dirname ${PROG}`/`basename ${PROG} .txt`_txt.hex

     # This will identify a hex address and up to 4 4-digit hex data values
     # ( caveat - ADDA may be either a mnemonic or a 4-digit hex value
     #   hopefully this will not change the behaviour of the system )
     #
     # strip leading spaces
     # add trailing space
     # replace any whitespace with a single space
     # delete lines which don't start with an address
     # delete the leading @ to avoid processing the same line twice
     # convert A-F to lower case
     sed \
       -e 's/^[ 	]*//' \
       -e 's/$/ /' \
       -e 's/[ 	][ 	]*/ /g' \
       -e '/^@[0-9A-Fa-f]/!s/^.*$//' \
       -e 's/^@//' \
       -e 's/A/a/g' -e 's/B/b/g' -e 's/C/c/g' -e 's/D/d/g' -e 's/E/e/g' -e 's/F/f/g' \
       -e 's/^\([0-9a-f][0-9a-f]* [0-9a-f]\{4\} [0-9a-f]\{4\} [0-9a-f]\{4\} [0-9a-f]\{4\}\) .*/@\1/' \
       -e 's/^\([0-9a-f][0-9a-f]* [0-9a-f]\{4\} [0-9a-f]\{4\} [0-9a-f]\{4\}\) .*/@\1/' \
       -e 's/^\([0-9a-f][0-9a-f]* [0-9a-f]\{4\} [0-9a-f]\{4\}\) .*/@\1/' \
       -e 's/^\([0-9a-f][0-9a-f]* [0-9a-f]\{4\}\) .*/@\1/' \
       -e 's/^\([0-9a-f][0-9a-f]*\) .*/@\1/' \
       ${PROG} > $HEXPROG

     echo $HEXPROG
   else
     echo Unknown program file format ${PROG}
     echo Expecting .hex or .sv or .txt file
     exit
   fi 
   shift
elif [ -f ${LIB}/prog.hex ]
then
   HEXPROG=${LIB}/prog.hex
else
   HEXPROG=${SYS}/prog.hex
fi

PROGRAM="${SVPROG} +define+prog_file=\"${HEXPROG}\""

if [ -f "$1" ]
then
   DATA=$1
   if [ `basename ${DATA} .hex` != `basename ${DATA}` ]
   then
     echo Found hex serial data file ${DATA}
     
     DATA_FILE="+define+data_file=\"${DATA}\""

     shift
   fi 
fi

no_more_numbers=false
while [ $# != 0 ] && [ "$no_more_numbers" = "false" ]
do
   case $1 in
      0*L | 1*L | 2*L | 3*L | 4*L | 5*L | 6*L | 7*L | 8*L | 9*L )
         echo Setting maximum number of LED writes
         MAX_LEDS=+define+max_led_writes=`echo $1 | sed -e 's/L$//'`
         shift
         ;;
      0* | 1* | 2* | 3* | 4* | 5* | 6* | 7* | 8* | 9* )
         echo Setting simulation time
         SIM_TIME="+define+sim_time=${1}us"
         shift
         ;;
      *)
         no_more_numbers=true
         ;;
   esac
done

if [ "$simtype" = "NC" ] || [ "$simtype" = "NC_GUI" ]
then
  rm -rf INCA_libs
elif [ "$simtype" = "MODELSIM" ]
then
  PATH=/opt/cad/soft/mentor/modeltech/bin:${PATH}

  /bin/rm -rf work
  vlib work

  /bin/rm -f vsim.cmd
  echo "run -all" >> vsim.cmd
  echo "exit" >> vsim.cmd

fi

if [ "$simtype" = "NC_GUI" ]
then
  rm -f .simvisionrc
  if [ -f ${LIB}/system.tcl ]
  then
     simcommand="${simcommand} +tcl+${LIB}/system.tcl"
  fi
fi

echo ${simcommand} $SIM_OPT -y $LIB -y $SYS $LIB_OPT \
+libext+.sv +incdir+$LIB $LIB/opcodes.svh $SYS/system.sv ${PROGRAM} ${DATA_FILE} \
$SIM_TIME $MAX_LEDS $TIMESCALE $* ${vsim_options}

export LIB
export SYS

${simcommand} $SIM_OPT -y $LIB -y $SYS $LIB_OPT \
+libext+.sv +incdir+$LIB $LIB/opcodes.svh $SYS/system.sv ${PROGRAM} ${DATA_FILE} \
$SIM_TIME $MAX_LEDS $TIMESCALE $* ${vsim_options}