## This file is a general .xdc for the Nexys4 rev B board
## To use it in a project:
## - uncomment the lines corresponding to used pins
## - rename the used ports (in each line, after get_ports) according to the top level signal names in the project

## Clock signal
##Bank = 35, Pin name = IO_L12P_T1_MRCC_35,					Sch name = CLK100MHZ
set_property PACKAGE_PIN E3 [get_ports CLK]
set_property IOSTANDARD LVCMOS33 [get_ports CLK]
create_clock -period 10.000 -name sys_clk_pin -waveform {0.000 5.000} -add [get_ports CLK]

## Switches
set_property PACKAGE_PIN P4 [get_ports RESET]
set_property IOSTANDARD LVCMOS33 [get_ports RESET]



## LEDs
##Bank = 34, Pin name = IO_L24N_T3_34,						Sch name = LED0
set_property PACKAGE_PIN T8 [get_ports {LED[0]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[0]}]
##Bank = 34, Pin name = IO_L21N_T3_DQS_34,					Sch name = LED1
set_property PACKAGE_PIN V9 [get_ports {LED[1]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[1]}]
##Bank = 34, Pin name = IO_L24P_T3_34,						Sch name = LED2
set_property PACKAGE_PIN R8 [get_ports {LED[2]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[2]}]
##Bank = 34, Pin name = IO_L23N_T3_34,						Sch name = LED3
set_property PACKAGE_PIN T6 [get_ports {LED[3]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[3]}]
##Bank = 34, Pin name = IO_L12P_T1_MRCC_34,					Sch name = LED4
set_property PACKAGE_PIN T5 [get_ports {LED[4]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[4]}]
##Bank = 34, Pin name = IO_L12N_T1_MRCC_34,					Sch	name = LED5
set_property PACKAGE_PIN T4 [get_ports {LED[5]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[5]}]
##Bank = 34, Pin name = IO_L22P_T3_34,						Sch name = LED6
set_property PACKAGE_PIN U7 [get_ports {LED[6]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[6]}]
##Bank = 34, Pin name = IO_L22N_T3_34,						Sch name = LED7
set_property PACKAGE_PIN U6 [get_ports {LED[7]}]
set_property IOSTANDARD LVCMOS33 [get_ports {LED[7]}]
##Bank = 34, Pin name = IO_L15P_T2_DQS_34,						Sch name = LED15
set_property PACKAGE_PIN P2 [get_ports LOCKUP]
set_property IOSTANDARD LVCMOS33 [get_ports LOCKUP]